Research progress on conservative endodontic access cavities and its stress analysis of teeth / 口腔疾病防治

@#Conservative endodontic access cavity (CEC) is the first step of minimally invasive endodontics. After that operation, teeth retain the dental hard tissue, such as crest and peri-cervical dentin, to a large extent. It is of great significance to reduce the tissue excision and achieve a favorable prognosis. There are a variety of approaches and corresponding cavities in CEC. The methods to determine the medullary approach include X-ray localization, micro CT/cone beam CT localization and digital guide plate localization. Among them, X-ray film and micro CT/cone beam CT are simple and commonly used in the clinic. For more complex root canal systems, the use of a digital guide plate can establish a more accurate pulp opening pathway and reduce the unnecessary loss of tooth hard tissue. However, the positioning price of a digital guide plate is high, and it has not been widely used in the clinic. The hole types of CEC include minimally invasive medullary hole type, super conservative minimally invasive medullary hole type, "Truss" hole type and cutting end hole type. The stress analysis of CEC and traditional endodontic access (TEC) cavity are mainly based on the loading of teeth by a universal mechanical testing machine in vitro, finite element analysis and clinical observation. Most scholars’ studies have shown that minimally invasive endodontics can improve the fracture resistance of teeth, but the differential capacities of CEC and TEC remain controversial. How does on balance the purpose of pulp treatment and the maximum retention of tooth tissue? Further exploration is still needed.

Guided endodontic access of severe calcified tooth without incisal edge ­ case report / Acesso endodôntico guiado de dente calcificado severamente sem borda incisal ­ relato de caso

Pulp tissue may suffer calcification because of trauma, operative procedures or carious lesions. This paper aimed to report and discuss the guided endodontic access as an alternative treatment. A 52 years old female patient had severe root canal calcification of tooth #11 associated with a radiolucent periapical lesion. Firstly, the crown and metal post and core were removed. A digital impression and cone-beam computed tomography "CBCT" scans were performed and imported to implant planning software (SimPlant Version 11; Materialise Dental, Leuven, Belgium).The guided endodontic access template was designed to allow the drill to reach a distance of 2 mm short of the apical foramen, once printed, it was tested in the mouth to evaluate its insertion and stability in the dental arch. The calcified root canal was penetrated using the access drill rotating by a low-speed hand-piece (10,000 rpm) under saline solution irrigation through advancing movements. Then, the apical foramen was negotiated with C-Pilot files #10 and #15. The working length was measured using the iPex-II apex locator. The instrumentation was carried out with Reciproc R50 and 2.5% sodium hypochlorite. One week later, a full-ceramic crown preparation was performed, and polyvinyl siloxane impression was carried out. A total of three follow-up sessions were performed after one week, one and twelve months. Bone neoformation was observed in the site of the periapical lesion and the patient had no signs or symptoms of any discomfort. Therefore, guided endodontics is indicated for severe calcified root canals.(AU)

O tecido pulpar pode sofrer calcificação por trauma, procedimentos cirúrgicos ou como resposta a lesões cariosas. Este trabalho teve como objetivo relatar e discutir o acesso endodôntico guiado como opção de tratamento. Paciente do sexo feminino, 52 anos, com calcificação severa do canal radicular do dente 11 associada a lesão periapical radiolucida. Na primeira intervenção clínica, a coroa e o pino de metal foram removidos. Uma impressão digital e imagens de CBCT foram realizadas e importadas para o software de planejamento de implante (SimPlant Versão 11; Materialize Dental, Leuven, Bélgica) tentando projetar um modelo de acesso endodôntico guiado para permitir que a broca alcance uma distância de 2 mm antes do forame apical, uma vez impresso, foi testado na boca para avaliar sua inserção e estabilidade na arcada dentária. O canal radicular calcificado foi penetrado com broca de acesso girando por peça de mão de baixa velocidade (10.000 rpm) sob irrigação com solução salina por meio de movimentos de avanço. Em seguida, o forame apical foi negociado com as limas C-Pilot nº 10 e nº 15. O comprimento de trabalho foi determinado usando o localizador de ápice iPex-II. A instrumentação foi realizada com Reciproc R50 e hipoclorito de sódio 2,5%. Uma semana depois, foi realizado o preparo da coroa total em cerâmica e a moldagem com polivinilsiloxano. Um total de três sessões de acompanhamento foram realizadas após uma semana, um e doze meses. A neoformação óssea foi observada no local da lesão periapical e a paciente não apresentava sinais ou sintomas de qualquer desconforto. Portanto, o acesso endodôntico guiado é indicado para canais radiculares calcificados severamente.(AU)

Estratégias minimamente invasivas de acesso e preparo e os diferentes desfechos na terapia endodôntica / Minimally invasive access and root canal preparation strategies and the different outcomes in endodontic therapy

As cavidades de acesso dominaram a recente discussão sobre a Endodontia minimamente invasiva (EMI). No entanto, a rotulagem da EMI é mais ampla, envolvendo o uso de instrumentos com conicidades reduzidas ou geometrias inovadoras que permitam a remoção mínima de dentina. Além disso, aprimoramentos metodológicos têm sido sugeridos para mimetizar condições clínicas. Buscando responder algumas questões acerca da EMI, a presente tese é dividida em dois estudos. O estudo 1 avaliou a influência do acesso ultraconservador (UltraAC) na instrumentação, na qualidade da obturação e na capacidade máxima de carga para fratura em molares inferiores após o preparo do canal com o sistema XP-endo Shaper (XP) ou Reciproc (RC) em condições clínicas simuladas. Para isso, quarenta molares inferiores foram microtomografados e pareados em quatro grupos (n = 10), de acordo com o acesso e a instrumentação: TradAC/RC, TradAC/XP, UltraAC/RC e UltraAC/XP. Os dentes foram reescaneados e os parâmetros da instrumentação e obturação foram analisados. Os dentes foram restaurados e submetidos à ciclagem termomecânica e à capacidade máxima de carga para a fratura. O teste ANOVA foi usado para a análise estatística (P < 0,05). Os grupos TradAC apresentaram menor porcentagem (%) de área não preparada do que os grupos UltraAC (P < 0,05). O grupo UltraAC/XP apresentou a menor % de dentina removida (P < 0,05). A % de debris foi menor nos grupos UltraAC/XP e TradAC/XP do que no UltraAC/RC e TradAC/RC (P < 0,05). Os grupos UltraAC demonstraram maior % de espaços vazios e de material obturador na câmara pulpar (P < 0,05). Não houve diferença na capacidade máxima de carga para a fratura entre os grupos (P > 0,05). O estudo 2 avaliou o uso de instrumentos com conicidade reduzida - Bassi Logic ,03 (BL), com diferentes designs (XP) e como grupo de comparação o sistem Reciproc, na eficácia da instrumentação dos canais em condições clínicas simuladas. Vinte e quatro molares foram microtomografados, acessados de forma tradicional e divididos em três grupos (n = 8), de acordo com o preparo: BL, XP e RC. Nos grupos BL e RC, os canais mesiais foram instrumentados com 25/,03 ou R25 e o canal distal com 25/,03 e 40/,03 ou R25 e R40, respectivamente. No grupo XP, o mesmo instrumento foi utilizado em todos os canais (30/,04). Após o preparo, os dentes foram reescaneados e a % de área não preparada e de dentina removida foram avaliadas separadamente para os canais mesiais e distal. Os dados foram analisados com os testes ANOVA e de Tukey (P < 0,05). Verificou-se que o grupo BL apresentou maior % de área não preparada para ambos os canais em relação aos grupos XP e RC (P < 0,05). No entanto, não houve diferença na % de dentina removida entre os grupos (P > 0,05). Com base nos estudos, conclui-se que as estratégias minimamente invasivas adotadas no acesso e na instrumentação foram desvantajosas frente a tratamentos tradicionais, não justificando o seu uso(AU)

Access cavities have dominated the recent discussion on minimally invasive Endodontics (EMI). However, the issue of MIE is broader than access cavities, such as the use of instruments with reduced taper or innovative geometries that allow minimal dentin removal. Furthermore, methodological improvements have been suggested to mimic clinical conditions. Seeking to answer some questions about EMI, this thesis is divided into two studies. The first study evaluated the influence of ultraconservative access (UltraAC) on canal shaping, filling ability and maximum load capacity for fracture of mandibular molars after root canal preparation with XP-endo Shaper (XP) or Reciproc (RC), under simulated clinical conditions. Thus, forty mandibular molars were scanned and paired into four groups (n = 10), according to access and instrumentation protocol: TradAC/RC, TradAC/XP, UltraAC/RC and UltraAC/XP. Teeth were rescanned and the instrumentation and filling parameters were analyzed. The teeth were restored and submitted to thermomechanical cycling and maximum load capacity for the fracture. ANOVA test was used for statistical analysis (P < 0.05). The TradAC groups had a lower percentage (%) of unprepared area than the UltraAC groups (P < 0.05). The UltraAC/XP group had the lowest % of dentin removed (P < 0.05). The % of debris was lower in the UltraAC/XP and TradAC/XP groups than in the UltraAC/RC and TradAC/RC groups (P < 0.05). The highest % of voids and filling material in the pulp chamber was observed in the UltraAC groups (P < 0.05). There was no difference in the maximum load capacity for the fracture between the groups (P > 0.05). The second study evaluated the use of a reduced taper endodontic instrument system - Bassi Logic .03 taper (BL), expandable heat-treated system (XP) and, as comparison, the Reciproc system, on the ability to shape canals under simulated clinical conditions. For that, twenty-four mandibular molars were scanned and divided into three groups (n = 8), according to root canal instrumentation system: BL, XP and RC. In the BL and RC groups, the mesial canals were instrumented with 25/.03 or R25 and the distal canal with 25/.03 and 40/.03 or R25 and R40, respectively. In the XP group, the same instrument was used in all root canals (30/.04). After preparation, the teeth were rescanned and the % of unprepared area and dentin removed were evaluated separately for the mesial and distal canals. Data were analyzed using ANOVA and Tukey tests (P < 0.05). It was found that the BL group had a higher % of unprepared area for both root canals compared to the XP and RC groups (P < 0.05). However, there was no difference in the % of dentin removed between groups (P > 0.05). Based on the studies, it is concluded that there is no justification for the use of EMI since in general, UltraAC did not promote advantages over TradAC and the use of instruments with reduced taper resulted in a larger unprepared area, which could possibly influence the cleaning of the root canal system (AU)

Evaluation of complex mesiobuccal root anatomy in maxillary first molar teeth / Evaluación de la anatomía de la raíz mesiobucal compleja en los primeros dientes molares maxilares

The objective of this study was to investigate the complex anatomy of mesiobuccal roots, supporting and complementing commonly applied clearing technique, using access cavity modification and the pulpal groove deepening method. Three hundred and ninety eight extracted intact human maxillary first molars were included in this study. Firstly, modified rhomboidal shape access cavities were prepared then, the developmental groove between the mesiobuccal and the palatal canals was deepened 1 mm with a round slow speed bur. Indian ink was injected into both the canal orifices of mesiobuccal roots and into the groove between mesiobuccal and palatal canals, using a 22 gauge syringe. Then the clearing technique was applied. The incidence of one canal was 30.90 %, two canals was 62.07 %, three canals was 7.03 %. In twenty five (6.28 %) of the mesiobuccal roots, 8 root canal types, which are not included in Vertucci's classification, were seen. All these root canal types had three root canals. The establishment of adequate access and deepening of the pulp chamber floor increased the probability of locating the third canal in the mesiobuccal root of maxillary first molars.

El objetivo de este estudio fue investigar la compleja anatomía de las raíces mesiovestibulares, apoyando y complementando la técnica de limpieza aplicada comúnmente, usando la modificación de la cavidad de acceso y el método de profundización del surco pulpar. En este estudio se incluyeron 398 primeros molares maxilares, extraídos intactos. Se prepararon las cavidades de acceso con la forma romboidal modificada, el surco de desarrollo entre los conductos mesiovestibular y palatino se profundizó 1 mm con una fresa redonda de velocidad lenta. Se inyectó tinta china en los forámenes del canal de las raíces mesiovestibulares y en el surco entre los conductos mesiovestibular y palatino utilizando una jeringa de calibre 22. Luego se aplicó la técnica de limpieza. La incidencia de un canal fue del 30,90 %, dos canales del 62,07 % y tres canales del 7,03 %. En 25 casos (6,28 %) de las raíces mesiobucales, se observaron 8 tipos de conductos radiculares, que no están incluidos en la clasificación de Vertucci. Todos estos tipos de conductos tenían tres conductos radiculares. La determinación de un acceso adecuado y la profundización del piso de la cámara de pulpa aumentó la probabilidad de localizar el tercer canal en la raíz mesiovestibular de los primeros molares superiores.

A Complex Mandibular First Molar - An Endodontic Challenge Two Case Reports.

The aim of this article is to present two clinical cases of Mandibular first Molar with an additional distolingual root (Radix entomolaris-R E ) and in one case an additional canal in distal root known as D2,and a glance on the incidence of this anatomical feature and literature.

Two-Rooted Mandibular First Premolar : Case Report.

Abnormalities in the root canal anatomy are a commonly occurring phenomenon. A thorough knowledge of the root canal anatomy and its variations is necessary for successful completion of the endodontic treatment. Mandibular second premolars usually have a single root and a single root canal. The incidence of two separate roots itself in this tooth is quite rare. Mandibular premolars are known for having an aberrant anatomy. Often considered an enigma to the endodontist, the mandibular first premolar with dual canals dividing at various levels of the root can generate complex mechanical problems.Reports about the incidence of extra roots in these teeth are quite rare. This paper attempts at explaining a rare case of successful endodontic management of a two-rooted mandibular second premolar with awareness of data pertaining to the number of canals, knowledge of canal morphology, correct radiographic interpretation, and tactile examination of canal walls which are important in detecting the presence of multiple canals.

Stress analysis of maxillary premolars with composite resin restoration of notch-shaped class V cavity and access cavity; Three-dimensional finite element study / 대한치과보존학회지

The purpose of this study was to investigate the distribution of tensile stress of canal obturated maxillary second premolar with access cavity and notch-shaped class V cavity restored with composite resin using a 3D finite element analysis. The tested groups were classified as 8 situations by only access cavity or access cavity with notch-shaped class VS cavity (S or N), loading condition (L1 or L2), and with or without glass ionomer cement base (R1 or R2). A static load of 500 N was applied at buccal and palatal cusps. Notch-shaped cavity and access cavity were filled microhybrid composite resin (Z100) with or without GIC base (Fuji II LC). The tensile stresses presented in the buccal cervical area, palatal cervical area and occlusal surface were analyzed using ANSYS. Tensile stress distributions were similar regardless of base. When the load was applied on the buccal cusp, excessive high tensile stress was concentrated around the loading point and along the central groove of occlusal surface. The tensile stress values of the tooth with class V cavity were slightly higher than that of the tooth without class V cavity. When the load was applied the palatal cusp, excessive high tensile stress was concentrated around the loading point and along the central groove of occlusal surface. The tensile stress values of the tooth without class V cavity were slightly higher than that of the tooth with class V cavity.

The influence of different access cavity designs on the fracture strength in endodontically treated mandibular anterior teeth / 대한치과보존학회지

Straight access cavity design allows the operator to locate all canals, helps in proper cleaning and shaping, ultimately facilitates the obturation of the canal system. However, change in the fracture strength according to the access cavity designs was not clearly demonstrated yet. The purpose of this study was to determine the influence of different access cavity designs on the fracture strength in endodontically treated mandibular anterior teeth. Recently extracted mandibular anterior teeth that have no caries, cervical abrasion, and fracture were divided into three groups (Group 1 : conventional lingual access cavity, Group 2 : straight access cavity, Group 3 : extended straight access cavity) according to the cavity designs. After conventional endodontic treatment, cavities were filled with resin core material. Compressive loads parallel to the long axis of the teeth were applied at a crosshead speed of 2mm/min until the fracture occurred. The fracture strength analyzed with ANOVA and the Scheffe test at the 95% confidence level. The results of this study were as follows : 1. The mean fracture strength decrease in following sequence Group 1 (558.90 +/- 77.40 N), Group 2 (494.07 +/- 123.98 N) and Group 3 (267.33 +/- 27.02 N). 2. There was significant difference between Group 3 and other groups (P = 0.00). Considering advantage of direct access to apical third and results of this study, straight access cavity is recommended for access cavity form of the mandibular anterior teeth.

The effect of the endodontic access cavity on the marginal leakage of crowns / 대한치과보존학회지

The marginal integrity of the crown can be broken during endodontic access cavity preparation due to the vibration of burs. Therefore, the purpose of this study was to evaluate the effect of endodontic access cavity preparation on the marginal leakage of full veneer gold crowns. 24 intact molars were mounted in acrylic resin blocks and prepared for crowns by a restorative dentist and crowns were cast with gold alloy. 20 Crowns were cemented with glass ionomer cement and 2 crowns were not cemented for positive control. 200 thermo-cycles from 5degrees C to 50degrees C with a travel time of 20s were completed. Then samples were randomly divided into 2 experimental groups of 9 each. Endodontic access preparation and zinc-oxide eugenol temporary fillings were done in Group 1. Teeth in Group 2 were not treated. Samples were coated with 2 layers of nail varnish and were immersed in 1% methylene blue dye for 20 hrs. Endodontic access was prepared in 2 samples, which were coated with nail varnish on all surfaces for negative control. After washing in running water, gold crowns were cut with a #330 bur. Four buccolingual sections, 2 mm apart, were cut from the central section of each tooth and were examined and scored under the microscope for dye leakage. Score 1: leakage to the cervical 1/3 of the axial wall, Score 2: leakage to the middle 1/3 of the axial wall, Score 3: leakage to the coronal 1/3 of the axial wall, Score 4: leakage to the occlusal surface. The median value for Group 1 is 4 and for Group 2 is 2. The result of this study showed that samples in Group 1 leaked more than those in Group 2. This finding was significant(P<0.001).